Cutting OLIVE BAR

This morning we cut down the Olive Bar and found that with our molds about 1 inch sections are 4oz. We also found that to be more accurate we need to build a cutter. More on that later... but we did take a trip to Home Depot to find these yellow plastic caps for the ends of our PCV pipe molds that will work much better then wax paper and rubber bands:)

We also found this rubber piece that is supposed to be used in toilet tanks and a metal dowel that when combined make a nice tamper! Very lucky we found pieces that were so exact in size! Now next time our soap should be smoother around the edges without air pockets.